Server Hardware Basics

If you would like to read the other parts in this article series please go to:

In the past, all of the articles that I have written for this Web site have been intended for use by administrators with at least some level of experience. Recently though, there have been requests for articles targeted toward those who are just getting started with networking and that have absolutely no experience at all. This article will be the first in a series targeted toward novices. In this article series, I will start with the absolute basics, and work toward building a functional network. In this article I will begin by discussing some of the various networking components and what they do.

Network Adapters

The first piece of hardware that I want to discuss is a network adapter. There are many different names for network adapters, including network cards, Network Interface Cards, NICs. These are all generic terms for the same piece of hardware. A network card’s job is to physically attach a computer to a network, so that the computer can participate in network communications.

The first thing that you need to know about network cards is that the network card has to match the network medium. The network medium refers to the type of cabling that is being used on the network. Wireless networks are a science all their own, and I will talk about them in a separate article.

At one time making sure that a network card matched the network medium was a really big deal, because there were a large number of competing standards in existence. For example, before you built a network and started buying network cards and cabling, you had to decide if you were going to use Ethernet, coaxal Ethernet, Token Ring, Arcnet, or one of the other networking standards of the time. Each networking technology had its strengths and weaknesses, and it was important to figure out which one was the most appropriate for your organization.

Today, most of the networking technologies that I mentioned above are quickly becoming extinct. Pretty much the only type of wired network used by small and medium sized businesses is Ethernet. You can see an example of an Ethernet network card, shown in Figure A.

Figure A: This is what an Ethernet card looks like

Modern Ethernet networks use twisted pair cabling containing eight wires. These wires are arranged in a special order, and an RJ-45 connecter is crimped onto the end of the cable. An RJ-45 cable looks like the connector on the end of a phone cord, but it’s bigger. Phone cords use RJ-11 connectors as opposed to the RJ-45 connectors used by Ethernet cable. You can see an example of an Ethernet cable with an RJ-45 connector, shown in Figure B.

Figure B: This is an Ethernet cable with an RJ-45 connector installed

Hubs and Switches

As you can see, computers use network cards to send and receive data. The data is transmitted over Ethernet cables. However, you normally can’t just run an Ethernet cable between two PCs and call it a network.

In this day and age of high speed Internet access being almost universally available, you tend to hear the term broadband thrown around a lot. Broadband is a type of network in which data is sent and received across the same wire. In contrast, Ethernet uses Baseband communications. Baseband uses separate wires for sending and receiving data. What this means is that if one PC is sending data across a particular wire within the Ethernet cable, then the PC that is receiving the data needs to have the wire redirected to its receiving port.

You can actually network two PCs together in this way. You can create what is known as a cross over cable. A cross over cable is simply a network cable that has the sending and receiving wires reversed at one end, so that two PCs can be linked directly together.

The problem with using a cross over cable to build a network is that the network will be limited to using no more and no less than two PCs. Rather than using a cross over cable, most networks use normal Ethernet cables that do not have the sending and receiving wires reversed at one end.

Of course the sending and receiving wires have to be reversed at some point in order for communications to succeed. This is the job of a hub or a switch. Hubs are starting to become extinct, but I want to talk about them any way because it will make it easier to explain switches later on.

There are different types of hubs, but generally speaking a hub is nothing more than a box with a bunch of RJ-45 ports. Each computer on a network would be connected to a hub via an Ethernet cable. You can see a picture of a hub, shown in Figure C.

Figure C: A hub is a device that acts as a central connection point for computers on a network

A hub has two different jobs. Its first job is to provide a central point of connection for all of the computers on the network. Every computer plugs into the hub (multiple hubs can be daisy chained together if necessary in order to accommodate more computers).

The hub’s other job is to arrange the ports in such a way so that if a PC transmits data, the data is sent over the other computer’s receive wires.

Right now you might be wondering how data gets to the correct destination if more than two PCs are connected to a hub. The secret lies in the network card. Each Ethernet card is programmed at the factory with a unique Media Access Control (MAC) address. When a computer on an Ethernet network transmits data across an Ethernet network containing PCs connected to a hub, the data is actually sent to every computer on the network. As each computer receives the data, it compares the destination address to its own MAC address. If the addresses match then the computer knows that it is the intended recipient, otherwise it ignores the data.

As you can see, when computers are connected via a hub, every packet gets sent to every computer on the network. The problem is that any computer can send a transmission at any given time. Have you ever been on a conference call and accidentally started to talk at the same time as someone else? This is the same thing that happens on this type of network.

Cyber Power CyberPower OR1500PFCLCD PFC Sinewave UPS 1500VA 1050W PFC Compatible Tower
Speakers (Cyber Power)
  • 1500VA/1050 Watts, Pure Sine Wave UPS system - designed to support Active PFC power supplies and conventional power supplies
  • Line interactive, AVR and GreenPower - Protects PCs, servers, network infrastructure. Prevents data loss and protects electronic equipment from harmful power problems.
  • Multifunction LCD provides runtime in minutes, battery status, load level and other status information. USB and Serial Communication Ports
  • Output Connections: (8) Battery Backup & Surge Protected Outlets
  • 3 Year Warranty
APC APC Smart-UPS RM SMT1500RM2U 1000W/1440VA 2U Rackmount LCD UPS System
Speakers (APC)
  • Output: Output Power Capacity: 1 Watts/1440 VA Max Configurable Power: 1 Watts/1440 VA Nominal Output Voltage: 120 V Efficiency at Full Load: 97%
  • Output Voltage Distortion: Less than 5% at full load Output Frequency (sync to mains): 57~63Hz for 60Hz nominal Crest Factor: Upto 5:1 Waveform Type: Sine wave Output...
  • Input: Nominal Input Voltage: 120 V Input Frequency: 50/60 Hz +/- 3Hz (auto sensing)
  • Batteries & Runtime: Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte - leak proof Typical recharge time: 3 hours
  • Communications & Management: Interface Ports: Smart Slot, USB Available Smart Slot Interface Quantity: 1 and This Item is Non-Returnable
Synology America Corp Synology NAS DiskStation DS116 (Diskless)
Personal Computer (Synology America Corp)
  • Compact & quiet, blending into your small offices and home
  • Dual-core CPU with hardware encryption engine
  • Over 112.53 MB/s reading, .41 MB/s writing
  • Dual USB 3.0 ports for external storages and printers
  • Multimedia streaming via DLNA-certified media server
Gameband/Now Computing Gameband for Minecraft - Small
Boost (Gameband/Now Computing)
  • Play Minecraft anywhere, anytime on any computer: Your game, your Worlds, your mod launchers, all your Minecraft experience on your wrist.
  • Automatic back-up of your entire Minecraft folder. No complicated installs. Simply plug Game band into the USB port of your Mac, Windows or Linux computer and click...
  • Each Game band is customizable to showcase messages, images and animation on the LED display right on your wrist.
  • Game band comes in two sizes: Small and Large. Each holds up to 8GB of information.
  • If you have any questions about getting or using a Game band, Pixel Furnace, our Backup and Replacement Services, or for any other reasons you can dream up, contact...
Oeveo Uninterruptible Power Supply (UPS) Mount for APC, CyberPower, and More - 12" x 4.6" x 15" - Proudly Made in the USA
Speakers (Oeveo)
  • Custom Made to Fit Your APC, CyberPower, and other brand Uninterruptible Power Supply Units, UPS, Battery Backup Units, and Surge Protectors! SEE BELOW for Mounting...
  • Innovative Design: Side Mount your UPS to a wall or other stable surface. Under Mount your UPS under your desk, workstation, or home office.
  • Easy to Install, Screws and Anchors INCLUDED! Dimensions are 12.1 x 4.7 x 15 . Sleek, Modern, Flat Black Powder Coat Finish!
  • Proudly Made in the USA!
  • COMPATIBLE WITH: APC BR1300G Back-UPS Pro 10-outlet UPS, APC BR1500G Back-UPS Pro 10-outlet UPS, APC BR24BPG Back-UPS Pro External Battery Pack, CyberPower CP1500AVRLCD...

Related posts: